• Sterile, polypropylene
• DNAse/RNAse and pyrogen-FREE
• White shaded writing area
• Black graduations
• Racked or bagged
• Temp Range: -80°C to +40°C
• The 15 mL tubes can withstand up to 12,000 (RCF)g, and the 50 mL can withstand up to 16,000 (RCF)g. 

澳洲幸运8开奖结果大小

"No more cracking at -80°C or buckling during spins!"

TPP Premium Conical Centrifuge Tubes are designed for exceptional performance that surpasses standard 15 mL and 50 mL conical tubes.

Ideal for aliquoting and centrifuging reagents

• Freezing & boiling proof
  
• Tubes and Caps are manufactured to withstand equivalent centrifugal force, thus eliminating abnormal tube buckling
  
• Screw Caps are designed with pronounced internal grooves
  
• Gas and Aerosol tight
  
• Enables a fitted seal to prevent leaking during spinning, transportation or storage
  
• Protects sample integrity by reducing contamination
  
• Graduations all the way down to 0.1 mL (for 15 mL tubes/ 0.5 mL for 50 mL tubes)
  

• Manufactured with the highest quality of virgin raw materials
• Minimizes sample interaction with the centrifuge tube material while preventing leaching that decreases sample integrity
• No additives, slip agents, biocides or plasticizers are utilized in the manufacturing process
  

•  On top of cap - promotes easy identification of tubes in rack
• On side of tube - permits detailed description labeling

• Centrifugation  & Storage - 15 & 50 mL PP conical tube , 15 mL PS conical tube and 13 mL PS flat tube
• Media filtration & Storage - 50 mL PP skirted tube
• Cell line cryovial freezing in isopropanol bath - 15 mL PS conical tube

Quality Assurance

• Sterile (gamma irradiated)
• DNAse/RNAse, pyrogen, and heavy metal-free

The 5mL Five-O MacroTubes take all of the conveniences of standard 15mL conical tubes and scales them down for space efficiency and decreased natural resource consumption. Useful from -86°C to 110°C, these tubes are a valuable resource for boiling and for sample preservation at very low temperatures. Additionally, the 56mm length (vs. 120mm for 15mL tubes, greatly reduces the risk of contamination of pipettor shafts, allowing 1mL or 5mL tips to easily reach the bottom.

The foam racks are similar to the packaging normally associated with 15mL tubes (upright with caps attached), but they require about 60% less storage space.

• Opaque Black Tube
• Compatible with standard equipment
• Centrifuge at up to 25,000xg
• RNase, DNase & pyrogen free
• Unsurpassed Clarity
• Dual graduations at every 0.2mL and 0.5mL

ITEM#	DESCRIPTION
MID-2540-OB	5mL MacroTube in Opaque Black, Sterile, w/ attached screw caps
MID-2590	2-tiered rack for 5mL MacroTubes
MID-2570	Centrifuge adapter for 5mL in 15mL cavity

Add a splash of color to your experiments with these SpectraTube Rainbow Cap Centrifuge tube. Tubes come configured in foam rack with five different colored caps to color code tubes to specific sample type, application, or date. All five cap varieties are flat, brightly colored, and frosted to make them easy to write on.

KEY BENEFITS:

• Colored caps for easy sample identification
• 15 mL rated to 12,000xg
• 50 mL rated to 15,000xg
• Sterile DNase, RNase, and pyrogen-free
• Leak proof
• suitable for stem cell research

10 mL Centrifuge Tube

• Closes gap between 5 mL & 15 mL tubes - Save on shipping charges and storage space
• Printed graduations - From 1.5 mL to 10 mL (0.5 mL increments)
• Reduced height (compared to 15 mL) - Minimizes shipping, storage, and waste
• Compatible with MTC C4015 Adapter - For cell straining and easy filling
• Sterilized bags of 50 tubes - RNase, DNase, & Pyrogen free

Whenever 15 mL is too much and 5 mL is not enough, MTC's new 10 mL screw cap conical centrifuge tube is the perfect compromise.

In addition to the obvious reduction in freight costs, storage space and plastic waste, the reduced height makes 100% sample recovery possible. This also reduces the cross-contamination risks associated with accidental contact between the pipette and the inner wall of 15mL tubes.

These new tubes are generally compatible with 15 mL centrifuge rotors, racks, block heaters, etc. MTC Bio 10 mL centrifuge tubes can withstand up to 12,000 xg maximum RCF* and are supplied sterile, certified RNase, DNase and pyrogen free. Packed in bags of 50 tubes with screw caps attached.

*Refers to liquids with a specific gravity of 1.0, using appropriate rotors, cushions and adapters.

Specifications

*without cap

25 mL Centrifuge Tubes

• Fits most 50 mL rotors - Rim eliminates need for adapter
• Printed graduations - From 5mL to 2mL
• Compact low-profile design - Minimizes shipping, storage, and waste
• Gamma sterilized - RNase, DNase, & Pyrogen free

MTC Bio's 25 mL tube is the newest addition to our family of screw cap conical tubes. Closing the obvious gap between 15 mL and 50 mL tubes, they are ideal for any application that requires more than 15 mL and less than 50 mL, including midipreps, general sample prep, centrifugation, mixing and storage.

Aside from the reduction in freight costs, storage space and plastic waste, the 33% reduced height and large diameter design (which is identical to 50 mL tubes) allows for faster re-suspension of pellets and 100% recovery of small samples. Concerns about cross-contamination (a frequent result of accidental contact between the pipette and the inner wall of a 15 mL tube) are eliminated by the hood-friendly, low profile, wide diameter format.

Additionally, the tubes have a 360° support rim, just below the cap. Similar to 1.5 mL tubes, this rim allows the tube to fit into most racks, blocks, shields and rotors without requiring adapters. Made of high clarity polypropylene, MTC Bio 25mL conical tubes can withstand up to 17,000 xg maximum RCF* and are supplied sterile, certified RNase, DNase and pyrogen free and packed in racks or bags of 25 tubes with screw caps attached.

*Refers to liquids with a specific gravity of 1.0, using appropriate rotors, cushions and adapters.

Specifications

*without cap

Centrifuge Tubes with Flip Top Caps

• Graduations are printed in bold, easy-to-read black ink and are accurate to +/-2%
• Large white marking area provides excellent contrast for identification
• Easy to write on flat surface polyethylene (HDPE) caps feature integrated leak-proof seal
• Tubes include graduations molded into the conical bottom, ideal for pellet viewing and small volume quantification
• Ergonomic flip top cap is designed for single handed operation

Packaging Options

• Convenient zip-closure bag is a practical alternative to folding and taping opened bags
• Paperboard rack is a recyclable, fold-flat alternative to bulky foam racks

Graduated Conical Base Centrifuge Tubes

• High-clarity, medical-grade polymer
• 5 mL graduations
• Rated to 20,000 × G (50 mL Tubes) & 17,000 x G (15 mL Tubes)
• Temperature range: -80°C to 40°C
• For use in medical, pharmaceutical, food industry, and molecular biology
• Sterile and certified free of detectable DNase, RNase, DNA, PCR inhibitors, and pyrogens

15mL and 50 mL screw cap centrifuge tubes that are now available in individual sterile packets. Individual packets eliminate the worry of whether or not tubes in an already opened bag are still sterile and creates an ease of not having to fumble around with open bags or racks of 50 tubes. These are sterile right up until the time you open the convenient easy peel package.

The conical 15ml and 50ml centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top surface for easy marking and labeling.

• Sterile, individually wrapped
• RNase, DNase, and Pyrogen free
• Easy peel wrappers
• Flat, markable screw caps

15 mL PerformR® Polystyrene Centrifuge Tubes

• Centrifuging to 3,000 x G
• Attached flat screw caps
• Molded graduations
• Validated Sterilization (ISO 11137) for use in Research and Medical lab
• Not autoclavable or freezable

Polystyrene tubes are made of crystal clear resin and have bold etched graduations.  They can be used for some culture applications that require a glass clear material.  Cap includes a polyethylene liner.

Caps have a three-ply co-extruded liner consisting of a foamed White Low-Density Polyethylene (LDPE) core sandwhiched between two solid layers of Low-Density Polyethylene which contains High-Density Polyethylene (HDPE) for improved stiffness.  Not autoclavable or freezable. 

All sterile package versions are sterilized with a validated and approved ISO 11137 method. Racked tubes are packaged in a sustainable cardboard rack that is easy to recycle.